Shop Full Width

/Shop Full Width
  • The Linvatec IM3301 features 480p Progressive scan output. 4th Generation autoclavable camera head. Multiple pure digital outputs. Electronic zoom. Programmable presets. Programmable remote camera head buttons. Outstanding light sensitivity. New ergonomic design. 800 Line horizontal resoluton. 10ft Cable.
  • As the third generation in Stryker’s HD 3-Chip camera line, the Stryker 1288 HD Camera features a 1920x1080p resolution and nine specialty settings, resulting in optimum color resolution and brightness. A groundbreaking new development of this camera is its ability to allow for wireless transmission capabilities in the OR when used with the Stryker WiSe wireless flat panel monitor. With the WiSe technology, OR clutter will be reduced with the elimination of the 30 ft. DVI cable to the secondary flat panel monitors in the room. Additional benefits of the 1288 HD 3-Chip Camera include four fully programmable buttons on the camera head, giving the surgeon the command to control the light source settings directly from the camera head. Also, by allowing for backwards compatibility with past generation digital capture devices, scopes and various flat panels, the 1288 HD 3-Chip Camera continues to offer new solutions for improved visualization within the OR. 1920x1080p resolution Improved clarity, focus and sharpness Wireless transmission capabilities when used with the Stryker WiSE wireless monitor Touch screen LCD interface Fully programmable camera head buttons
  • Linvatec 4mm 0° Hysteroscope. Many other surgical endoscopes available. Call (774) 888-1000 for additional inventory.
  • Dyonics Smith Nephew 10mm 0° Laproscope. Many other surgical endoscopes available. Call (774) 888-1000 for additional inventory.
  • Olympus Visera CLV S40 features: Ideal for Endoscopic TV oberservation connectable with conventional telescopes, fibrescopes, Visera videoscopes and OES fibrescope. Adaptable to all endoscopic procedures: The powerful and convenient CLV-S40 makes endoscopic procedures easier then ever. Powerful & Long-Life 300-Watt Xenon Lamp This high-quality xenon lamp provides an illumination which is ideal for endoscopy, allowing observation in deep sites or advanced techniques. Plus, it can be used continuously for 500 hours (in intermittent use, lamp life time may differ slightly). Automatic Brightness Control When the CLV-S40 is connected via a light guide cable to video systems such as the Visera system; brightness can be automatically adjusted, saving your time and energy. Standby Illumination can be set to standby using a switch on the front panel or a remote switch on the camera head. Intensity-Mode Memory With Intensity-Mode Memory, when the CLV-S40 is turned off in the high intensity mode, it will still be in that mode when turned back on. This is also true for the normal intensity mode. Easy-to-See Front Panel You can easily adjust brightness and power with buttons and switches on the front panel. Click here for VISERA
  • The Smith Nephew Dyonics 750 DyoCom features: Video Imager: 1/2″ high resolution CCD Resolution: 500 lines Signal-to-Noise: 47dB Scanning System: NTSC color format: 525 lines, 60 fields, 30 frames Video Output: 1 volt P-P, NTSC into 75 ohms RGB Output: 1 volt P-P, R-G-B & Sync into 75 ohms Y/C Output: Combined luminance / chroma signal into 4 pin mini Din plug Minimum Illumination: 5 lux AC Leakage Current: Less than 25 microamps Power Requirements: 110-120 VAC, 60 Hz, 50 Watts Operating Temperature: 32 degrees F (0 degrees C) to 120 degrees F (48.9 degrees C) Camera Head Dimension: 1.5″ diameter x 1.7″ length Camera Head Weight: 12.8 oz. CCU Dimensions: 3.4″ H x 16″ W x 11″ D CCU Weight: 7.5 lbs. Camera Cable: 12′ cable with edge card type connector system Lens Mount: Standard C-Mount 1″-32 UN-2A Focal Distance: 17.5mm
  • The Zeiss PhotoColposcope features: 4 Working joints for versaitility. Great for space constrained offices. 4 Locking casters. Easily transportable. Great image quality. Manual zoom & focus. Versatile design. Long reach swing arm. Distributed balance. Improved lighting.
  • The Zeiss 1FC features 5 Step magnification changer. Straight binocular. 250mm Objective lens. 10x/22b Widefield eyepieces. Manual fine focus. Inclined coupling. SuperLux 40 Xenon Light Source
  • The Leica Wild M680 surgical microscope has two independent zoom systems and two independent internal focusing systems, through a single objective lens. Projecting both views through a single lens allows the surgeon to look closely into deep incisions. The system can provide a unique collaborative environment between the surgeon and assistant. Each user has his or her own hand switch or foot pedal to adjust magnification and focus independently.
  • The Leica Wild OHS swiss design. Counter pivot arm for smooth fluid movement. Inclinable binocular. 10x/22b Eyepieces. Motorized focus & zoom. Fiber-optic illumination. Spare bulb & dust cover available. Pistol control. Innovative technology. Call today for more info!
  • The Oakworks CFPM 400 C-Arm Imaging Table incorporates Oakworks brand reputation for high quality and reliability. This new cost effective table is designed to accommodate mobile and ceiling suspended C-Arm systems. The CFPM400 is a 4 movement table that has all of the features required for successful pain management image-guided procedures. Its dynamic height range of 26”(66cm) to 44”(112cm) accommodates low height patient wheelchair transfers to maximum height C-Arm mobility requirements for full lateral imaging. The integrated head rest carbon fiber top is capable of a 10”(25cm) manual longitudinal travel, 15° Trendelenburg tilt, 12° reverse Trendelenburg tilt and 15° Lateral tilt while at the same time supporting up to 500 lbs (227 kg) of patient weight. The table is mounted on a new low profile base and can be moved easily from room to room and secured with 4 locking casters. Included with every table are a radiolucent table top pad, 1 crescent face rest pad, 2 supine cranial pads and 1 padded safety strap. This table promotes a 56”(142cm) metal free imaging area for maximum C-Arm efficiency and is controlled by 1 hand control and 1 foot control unit.
  • The Amsco Orthographic 2 orthopedic fracture surgical table offers a wide range of flexibility for most orthopedic procedures. It incorporates a mobile image intensifier interface, excellent stability and fast and easy surgical setup