-
The Alaris Gemini PC IV features: Operating principle: Linear Peristalsis. Dimensions 12.0″ x 14.75″ x 7.5″ (30.5 cm x 37.5 cm x 19.1 cm) Weight 26.5 lbs. (12.0 kg) Power Requirements 90 – 132 VAC, Current draw 0.1A nominal (0.36A maximum), 10 watts, fused at 0.4A, 50/60 Hz, 3 wire, single phase Battery Operation With new, fully charged batteries, approximately 4 hours with All four channels infusing as primary infusion at 125 ml/hr before a “BATTERY DISCHARGED” message. Electrical Leakage Less than 100 microamps Rate Selections 0.1-999 ml/hr. Note: Recommended maximum rate in the Controller Mode is 500 ml/hr. Volume-To-Be-Infused Selections 0.1-9999 ml KVO (Keep Vein Open Rate 1 ml/hr if set rate is 1 ml/hr or above; or set rate, if rate is 0.9 ml/hr or below. Occlusion Pressure Controller mode Container height ±12″ (±30 cm) Pump Mode 10±2 psi (517 ± 103 mmHg) for rates above 30 ml/hr. For rates of 30 ml/hr and below, the occlusion pressure will be less than 10 psi, an is rate-dependent. Selectable mode 25 – 517 mmHg in 25 mmHg increments to 500 mmHg. -
The HP Philips Codemaster XL high-performance, high-speed defibrillator charges from 0 to 360 joules in under 5 seconds, plus it offers a variety of advanced options easily customized to meet the needs of your unit. The CodeMaster XL+ Defibrillator by HP is a flexible choice for high-use areas of the hospital including operating rooms, intensive care units, cardiac care units, and emergency departments, as well as for clinics and ambulatory surgery centers. -
PC-based Edan ECG SE 1010 provides you an affordable and portable 12-channel ECG solution with powerful data analysis functions. Optional advanced analysis functions secure clinical accuracy and maximum decision-making efficiency. Features: Simultaneous 12 Leads acquisition handheld design Real-time ECG waveforms display on PC screen Auto /Manual measurement and interpretation WORD, PDF and JPG format reports transferred via E-mail Optional advanced analysis functions: Timed vectorcardiogram, VCG(3D), SAECG,QT interval dispersion, HRT, HFECG, Frequency Spectrum cardiogram 30s-900s HRV (heart rate variability) sample and analysis Stress test and exercise blood pressure monitor (option) -
Promo !
The ConMed Excalibur PC Plus and Power Plus models are available in bipolar or monopolar with cutting and coagulation. The Excaliburs are multi-purpose electrosurgical generators. Microprocessor control provides the user with safety and control. On the cut setting, these units provide 300 watts of output. A bipolar footswitch is available but optional as are rolling carts. -
Datascope Anestar Fresh gas decoupling. Volume constant ventilation. Automatic compliance compensation. Enhanced ventilator accuracy. Touch screen interface. Adult and pediatric ventilation modes. Integrated warmed breathing system. Manages moisture buildup. Eliminated rainout. Warms patient gasses. -
-
-
-
-
-
-
-
-
-
-
Hologic Discovery with AP spine and proximal femur, scan comparison, supine lateral BMD. (Delphi SL or A), forearm and whole body. Reporting Options The Discovery has the most advanced remote interpretation and reporting software available, including wireless networking, speech recognition compatibiity, QDR mobility (read scan anywhere anytime), the IRIS connectivity suite integrates with existing healthcare information systems. -
The Amsco Steris 3080/3085 features a radiolucent top and can be adjusted to Trendelenburg, back, side, foot and flex positions. It comes standard with a remote control for easy patient positioning. A Quick Look: Surgical table with radiolucent top One of the most durable, flexible and reliable surgical tables available Brings more efficiency to the operating room Fluoroscopic capabilities Simple patient positioning Return to level with a single command Features Overview: Remote control C-ARM Compatible Return to level and special positioning models available Positions include: Trendelenburg, back (raise or lower), side (lateral tilt), foot (raise or lower), flex (“v” or inverted “v”) Up to 500 lb capacity Refurbished with warranty Product Specifications: Load limit: up to 500 lbs. Maximum Height: 44″ Minimum Height: 27″ Trendelenburg: 25º Reverse Trendelenburg: 25º Lateral tilt: 18º -
The Amsco Orthographic 2 orthopedic fracture surgical table offers a wide range of flexibility for most orthopedic procedures. It incorporates a mobile image intensifier interface, excellent stability and fast and easy surgical setup -
The Oakworks CFPM 400 C-Arm Imaging Table incorporates Oakworks brand reputation for high quality and reliability. This new cost effective table is designed to accommodate mobile and ceiling suspended C-Arm systems. The CFPM400 is a 4 movement table that has all of the features required for successful pain management image-guided procedures. Its dynamic height range of 26”(66cm) to 44”(112cm) accommodates low height patient wheelchair transfers to maximum height C-Arm mobility requirements for full lateral imaging. The integrated head rest carbon fiber top is capable of a 10”(25cm) manual longitudinal travel, 15° Trendelenburg tilt, 12° reverse Trendelenburg tilt and 15° Lateral tilt while at the same time supporting up to 500 lbs (227 kg) of patient weight. The table is mounted on a new low profile base and can be moved easily from room to room and secured with 4 locking casters. Included with every table are a radiolucent table top pad, 1 crescent face rest pad, 2 supine cranial pads and 1 padded safety strap. This table promotes a 56”(142cm) metal free imaging area for maximum C-Arm efficiency and is controlled by 1 hand control and 1 foot control unit. -
The Leica Wild OHS swiss design. Counter pivot arm for smooth fluid movement. Inclinable binocular. 10x/22b Eyepieces. Motorized focus & zoom. Fiber-optic illumination. Spare bulb & dust cover available. Pistol control. Innovative technology. Call today for more info! -
The Leica Wild M680 surgical microscope has two independent zoom systems and two independent internal focusing systems, through a single objective lens. Projecting both views through a single lens allows the surgeon to look closely into deep incisions. The system can provide a unique collaborative environment between the surgeon and assistant. Each user has his or her own hand switch or foot pedal to adjust magnification and focus independently. -
The Zeiss 1FC features 5 Step magnification changer. Straight binocular. 250mm Objective lens. 10x/22b Widefield eyepieces. Manual fine focus. Inclined coupling. SuperLux 40 Xenon Light Source -
The Zeiss PhotoColposcope features: 4 Working joints for versaitility. Great for space constrained offices. 4 Locking casters. Easily transportable. Great image quality. Manual zoom & focus. Versatile design. Long reach swing arm. Distributed balance. Improved lighting. -
The Smith Nephew Dyonics 750 DyoCom features: Video Imager: 1/2″ high resolution CCD Resolution: 500 lines Signal-to-Noise: 47dB Scanning System: NTSC color format: 525 lines, 60 fields, 30 frames Video Output: 1 volt P-P, NTSC into 75 ohms RGB Output: 1 volt P-P, R-G-B & Sync into 75 ohms Y/C Output: Combined luminance / chroma signal into 4 pin mini Din plug Minimum Illumination: 5 lux AC Leakage Current: Less than 25 microamps Power Requirements: 110-120 VAC, 60 Hz, 50 Watts Operating Temperature: 32 degrees F (0 degrees C) to 120 degrees F (48.9 degrees C) Camera Head Dimension: 1.5″ diameter x 1.7″ length Camera Head Weight: 12.8 oz. CCU Dimensions: 3.4″ H x 16″ W x 11″ D CCU Weight: 7.5 lbs. Camera Cable: 12′ cable with edge card type connector system Lens Mount: Standard C-Mount 1″-32 UN-2A Focal Distance: 17.5mm
